Roofing, siding and metal building materials for contractors, builders and designersServing the U.S.
Home › Resources › Metal gauges explained

Metal gauges explained

Gauge is how steel thickness is listed. The lower the number, the thicker the steel.

crew installing metal siding

How gauge works

Gauge is an old system for listing sheet metal thickness. It runs backwards: a lower gauge number means thicker steel. 22-gauge steel is thicker than 26-gauge, which is thicker than 29-gauge.

Common gauges

Gauge Approximate thickness Typical use
29 About 0.014″ Residential and agricultural roofing and siding, liner panels
26 About 0.018″ Residential and light commercial roofing, standing seam, trim
24 About 0.024″ Commercial roofing, standing seam, longer spans, higher wind areas
22 About 0.030″ Heavy commercial and structural standing seam
16 to 12 About 0.060″ to 0.105″ Purlins, girts, eave struts and structural framing

Actual thickness varies slightly by manufacturer and depends on whether the thickness includes the coating. Your quote lists the exact gauge.

Why gauge matters

  • Strength and span. Thicker panels can span farther between purlins and carry more load.
  • Dent resistance. Thicker steel resists hail, foot traffic and handling damage better.
  • Wind ratings. Some wind-rated systems require a minimum gauge.
  • Flatness. Thicker panels show less waviness (oil canning) in flat areas.
  • Cost and weight. Thicker steel weighs more and costs more.

Choosing a gauge

  • Barns, sheds and shops: 29-gauge is common and economical. 26-gauge adds strength and dent resistance.
  • Homes: 26-gauge is the usual choice for metal roofs on homes. 24-gauge is common for premium standing seam.
  • Commercial: 24-gauge and heavier, as the engineering and wind zone call for.
  • Hail-prone areas: Heavier gauges and impact-rated systems resist damage better.

Local building codes, wind zones and the manufacturer's tested assemblies may set a minimum gauge. Check before ordering.

Gauge isn't everything

Two panels of the same gauge can perform differently because of the steel grade, rib profile and coating. Compare the whole system, not just the gauge number.

Related