Roofing, siding and metal building materials for contractors, builders and designersServing the U.S.
Home › Products › Steel Framing

Steel Framing

Steel framing is the structure behind metal buildings, barns, carports, shops and many commercial roofs and walls. Steel doesn't rot, warp, split or attract termites, and it stays straight over time. We supply purlins, girts, tubing, studs and track, and structural shapes, in the lengths your project needs.

steel framing

Framing members

Member Shape Typical depths Typical gauges Common uses
C-purlin / C-girt C-shaped channel with lips 4″ to 12″ 16, 14, 12 Roof purlins, wall girts, headers, door framing
Z-purlin / Z-girt Z-shaped section 6″ to 12″ 16, 14, 12 Long roof runs; Z's can overlap at supports for strength
Hat channel Hat-shaped furring strip 7/8″ to 1½″ 26 to 20 Purlins for metal roofs over wood, furring for walls and ceilings
Eave strut Sloped C-shaped member 6″ to 10″ 14, 12 Eaves of metal buildings, where roof meets wall
Square and rectangular tube Hollow tube 2″ to 4″ and up 14, 12, 11 Carports, frames, posts, gates, trusses
Studs and track C-stud with U-shaped track 2½″ to 6″ 25 to 16 Interior walls, light structural walls, soffits
Angle and flat bar L-shape or flat strip Various Various Bracing, clips, trim supports
Structural beams and columns Wide-flange (I-shaped) and tube steel Per engineering Per engineering Main frames of larger metal buildings

Sizes, gauges, coatings and availability vary by manufacturer and mill. Your quote lists the exact specs.

C-purlins and girts. The workhorse of light steel buildings. Used as roof purlins, wall girts and framing around doors and windows.

Z-purlins and girts. The Z shape lets one purlin lap over the next at each support. That overlap makes the run stronger and allows longer spans, which is why Z's are common on larger metal buildings.

Hat channel. A light furring strip that creates a flat, even surface. It is often used to put a metal roof over an existing roof, to make an air gap under panels, or to fur out walls and ceilings.

Tubing. Square and rectangular tube steel is strong in every direction, so it is common for carport frames, posts, trusses and gates.

Studs and track. Light-gauge steel framing for walls and ceilings, used in commercial interiors and some homes.

Gauge and thickness

Gauge Typical thickness Typical use
20 about 0.036″ Light studs, hat channel
16 about 0.060″ Light purlins and girts, structural studs
14 about 0.075″ Purlins, girts, carport framing
12 about 0.105″ Heavy purlins, eave struts, longer spans

Lower gauge numbers mean thicker steel. Actual thickness varies slightly by manufacturer.

Coatings and finishes

  • Galvanized: zinc-coated steel, usually G60 or G90 (G90 has more zinc and better corrosion resistance). Common for purlins, girts, studs and tube.
  • Primed (red oxide or gray): a shop primer for steel that will be painted or kept indoors.
  • Painted: some framing comes pre-painted to match building colors.

Engineering and code

Purlin size, gauge and spacing depend on the span, roof load, wind speed, snow load and local code. For buildings that need a permit, framing should be sized by a licensed engineer or taken from stamped building plans. We supply the members your plans call for; send the plans or a material list with your quote request.

Installation basics

  • Steel framing is fastened with self-drilling screws, bolts or welds, depending on the member and the design.
  • Follow the plans for lap length, bracing and bridging. Purlins and girts need bracing to reach their full strength.
  • Cut ends of galvanized steel can be touched up with zinc-rich paint.

What to include in your quote request

  1. Member type, depth, flange size and gauge
  2. Lengths and quantities, or plans or a material list
  3. Coating: galvanized, primed or painted
  4. Clips, connectors and fasteners needed
  5. Job location

Get a quote

Related products

Common questions

C or Z purlins: which do I need?

Your plans should say. In general, C's suit shorter, single spans and framed openings, and Z's suit longer continuous runs where they can lap at supports.

Can I order exact lengths?

Framing members can be ordered in the lengths your project needs. List the lengths in your quote request.

Is steel framing more expensive than wood?

It depends on the project and market prices. Steel often costs more up front but lasts longer with less upkeep, and it doesn't burn, rot or attract termites.

Can I use hat channel to put a metal roof over shingles?

In many cases, yes. Hat channel or wood purlins create a flat base and an air gap. Check local code and the panel manufacturer's instructions first.

Do you supply complete metal building kits?

We supply framing members and materials from your plans or material list. Tell us what your project includes in your quote request.